Say something...

[wildcard]

QWCL is running in a windowed mode. You can bind a key to

[wildcard]

the commands "vid_windowed; wait; vid_minimize" to minimize QWCL

[wildcard]

regardless of whether you're running in windowed or fullscreen mode.

[wildcard]

You can turn off page flipping by setting the console variable

[wildcard]

vid_nopageflip to 1, then setting a new mode. (Note that the

[wildcard]

vid_nopageflip setting does not take effect until the next mode set.)

[wildcard]

Some systems run faster with page flipping turned off; also, page

[wildcard]

is a workaround for this. Note that vid_nopageflip is a persistent

[wildcard]

variable; it retains its setting until it is explicitly changed again,

[wildcard]

even across multiple QWCL sessions.

[wildcard]

The vid_forcemode console command sets the specified mode, even if

[wildcard]

it's the same as the current mode (normally the mode set only happens

[wildcard]

if the new mode differs from the current mode). This is generally

[wildcard]

useful only if you've modified the characteristics of video mode 2

[wildcard]

(the configurable window) while you're in mode 2, and want to force

[wildcard]

the new characteristics to take effect.

[wildcard]

Whenever you switch to running QWCL in a window, the window is

[wildcard]

placed at the same location it was in the last time QWCL ran

[wildcard]

in a window. You can reset the window position to the upper left

[wildcard]

by using the -resetwinpos command-line switch. The window position

[wildcard]

is stored in the vid_window_x and vid_window_y console variables.

[wildcard]

| Video command-line switches |

[wildcard]

The full list of video-related command-line switches is:

[wildcard]

-dibonly: QWCL will use only windows (both normal, framed windows on the

[wildcard]

desktop and fullscreen, borderless windows), not any direct hardware

[wildcard]

access modes such as DirectDraw or VESA modes, or even VGA 320x200

[wildcard]

mode. This is the closest thing to a guaranteed-to-run fullscreen

[wildcard]

mode QWCL has.

[wildcard]

-nowindirect: QWCL will not try to use VESA VBE 2.0 modes, or VBE/AF

[wildcard]

1.0 or later modes. Note that if there are both DirectDraw and VESA

[wildcard]

-novbeaf: QWCL will not try to use VBE/AF 1.0 or later modes.

[wildcard]

-startwindowed: QWCL will come up in a windowed mode, without going

[wildcard]

fullscreen even during initialization.

[wildcard]

-noforcevga: normally, QWCL uses VGA mode 0x13 for the default 320x200

[wildcard]

mode, even if a DirectDraw or VESA 320x200 mode exists. However,

[wildcard]

DirectDraw and VESA modes can be considerably faster than mode 0x13,

[wildcard]

because they can set up a linear framebuffer with higher memory

[wildcard]

bandwidth. If you specify -noforcevga, the default 320x200 mode in

[wildcard]

the menu will be a DirectDraw or VESA mode if one exists. This has no

[wildcard]

effect on modes selected via the console variable vid_mode, and if

[wildcard]

320x200 is already your video mode, -noforcevga doesn't do anything

[wildcard]

until you use the menu to select another mode, then select 320x200

[wildcard]

again. (So if your default mode is 320x200 and you then specify

[wildcard]

-noforcevga, switch away to some other mode and then back to 320x200

[wildcard]

to get the potentially faster 320x200 mode.) The downside to this

[wildcard]

switch is that DirectDraw and VESA modes can cause problems in some

[wildcard]

systems, due to driver bugs or hardware incompatibilities; if you

[wildcard]

experience problems with this switch, don't use it.

[wildcard]

-noautostretch: don't stretch windowed modes selected with

[wildcard]

-startwindowed to double resolution.

[wildcard]

-nofulldib: don't use fullscreen, borderless windows, even if there

[wildcard]

are no DirectDraw or VESA modes available.

[wildcard]

-allow360: allow listing of 360-wide modes in the video mode menu.

[wildcard]

These are normally filtered out to make sure the menu doesn't get too

[wildcard]

full, which could cause high-res modes not to be displayed.

[wildcard]

-notriplebuf: prevent triple-buffered page flipping (rather than double-

[wildcard]

buffered). This may result in slower performance, but is a workaround

[wildcard]

if you encounter problems with flicker or initialization failure, which

[wildcard]

could possibly happen in some modes with some DirectDraw drivers.

[wildcard]

| A bit about how QWCL sound works |

[wildcard]

QWCL can use either DirectSound or Windows wave output to generate

[wildcard]

sound. If DirectSound is available, it is used; if not, if wave sound

[nathan]

hhahah OH SHIT

[wildcard]

Release Notes for McAfee VirusScan Home Edition

[wildcard]

Version 7.02, (c) January 2003 Networks

[wildcard]

notes. The McAfee Consumer Products Division

[wildcard]

Edition. This Readme file contains important

[wildcard]

recommend that you read the entire document.

[wildcard]

- NF1 New Features

[wildcard]

- DC1 Documentation

[wildcard]

- AD1 Additional Information

[wildcard]

- CM1 Contacting McAfee Customer Products

[wildcard]

- FQ1 Frequently Asked Questions

[wildcard]

- CT1 Copyright and Trademark Attributions

[wildcard]

NOTE: A unique identifying code precedes

[wildcard]

particular heading within the file, copy the

[wildcard]

each heading in this file. To jump to a

[wildcard]

the list above into your text editor's

[wildcard]

directly to that heading.

[wildcard]

been fixed, refer to the AD1 section.

[wildcard]

__________________

[wildcard]

- McAfee SecurityCenter combines a free set of

[wildcard]

products.

[wildcard]

provided by the Automatic File Protection,

[wildcard]

the VShield on-access scanner. If you

[wildcard]

of e-mail attachments and file downloads. It

[wildcard]

scanning is turned off; including scanning

[wildcard]

e-mail, download, and Internet scanning.

[wildcard]

Eudora and many other e-mail clients that

[wildcard]

- HAWK improvements - in addition to MS

[wildcard]

- Integrated with Windows Explorer - scan

[wildcard]

based e-mail such as Hotmail).

[wildcard]

uses POP/SMTP (does not include Internet

[wildcard]

newer before they are opened.

[wildcard]

MS Word, Excel, and PowerPoint, 2000 or

[wildcard]

powerful tools you need to control the

[wildcard]

connected via DSL, cable modem, or dial-up;

[wildcard]

Detection, color-coded and audible firewall

[wildcard]

McAfee Firewall provides Intrusion

[wildcard]

network activity, and more.

[wildcard]

more product guides saved in Adobe Acrobat

[wildcard]

documentation, consisting usually of one or

[wildcard]

the platform on which the product runs.

[wildcard]

documents that contain hyperlinks, outlines and

[wildcard]

that allows you to read .PDF documents from

[wildcard]

within your web browser while online. Copies of

[wildcard]

comes with the product CD-ROM or is available

[wildcard]

CD-ROM. A copy of the free Acrobat Reader also

[wildcard]

documentation set drawn from these components:

[wildcard]

or Administrator's Guide that comes with

[wildcard]

listed documents. Consult the User's Guide

[wildcard]

- A printed Product Guide, which introduces

[wildcard]

provides a brief overview. In many cases, an

[wildcard]

the product, provides installation

[wildcard]

McAfee Consumer Products Division FTP site

[wildcard]

- A User's Guide saved on the product CD-ROM

[wildcard]

discuss how best to use your McAfee software

[wildcard]

Products Division. User's Guides document

[wildcard]

- Specialized guides. These can include

[wildcard]

reference guides, deployment guides,

[wildcard]

for intrusion detection software, and other

[wildcard]

configuration guides, vulnerability guides

[wildcard]

use your McAfee software. The format of the

[wildcard]

online help system for the product will

[wildcard]

quick access to hints and tips about how to

[wildcard]

product. In most cases, the software will

[wildcard]

topics.

[wildcard]

buttons, lists or other elements within

[wildcard]

Division product, you agree to the license

[wildcard]

you install a McAfee Consumer Products

[wildcard]

Associates product. Read it carefully. If

[wildcard]

changes to the documentation, lists any

[wildcard]

- This file contains last-minute additions or

[wildcard]

To ask about eligibility for updates, upgrades,

[wildcard]

incremental product updates.

[wildcard]

to Networks Associates products, please send

[wildcard]

To use McAfee VirusScan Home Edition you need:

[wildcard]

- Windows 98, Windows Me, Windows 2000

[wildcard]

Microsoft at:

[wildcard]

- An Intel Pentium-class or compatible

[wildcard]

processor rated at 100 MHz or higher.

[wildcard]

- CD-ROM drive.

[wildcard]

- To take full advantage of your McAfee

[wildcard]

should have an Internet connection, either

[wildcard]

through your local-area network, or via

[wildcard]

- HotSync Manager 3.0 or later

[wildcard]

- PalmPilot Palm III or later

[wildcard]

- Wireless Device Synchronization:

[wildcard]

- PsiWin 2.3 or equivalent

[wildcard]

- For non-Psion EPOC devices – PsiWin

[wildcard]

- Symbian EPOC

[wildcard]

- EPOC Connect 5

[wildcard]

2.3/

[wildcard]

- Please refer to the

[wildcard]

Please uninstall older versions of McAfee

[wildcard]

IN1 - INSTALLATION

[wildcard]

older version of McAfee VirusScan or McAfee

[wildcard]

Firewall, you will be prompted to exit Setup

[wildcard]

restart Setup.

[wildcard]

and uninstall the older programs. After

[wildcard]

- (1) If your computer runs Windows 2000

[wildcard]

Professional or Windows XP (Home or

[wildcard]

To install McAfee VirusScan:

[wildcard]

- (2) Insert the McAfee VirusScan CD into your

[wildcard]

Installation menu does not automatically

[wildcard]

software on your system.

[wildcard]

- (3) Use the following procedure if the

[wildcard]

or, if you obtained your software via

[wildcard]

Step 4.

[wildcard]

download at a McAfee web site.

[wildcard]

- From the Windows Start menu, select

[wildcard]

Run.

[wildcard]

text box, and click OK.

[wildcard]

for your CD-ROM drive or the path to

[wildcard]

extracted VirusScan files. To search

[wildcard]

the folder that contains your

[wildcard]

disk or CD-ROM, click Browse.

[wildcard]

for the correct files on your hard

[wildcard]

computer is already running the Microsoft

[wildcard]

- If your computer runs Windows XP,

[wildcard]

already exists on your system. If your

[wildcard]

Windows Me, or Windows 2000, MSI

[wildcard]

computer runs an earlier Windows

[wildcard]

your computer if you previously

[wildcard]

MSI. In either of these cases, Setup

[wildcard]

will display its first wizard panel

[wildcard]

continue.

[wildcard]

earlier version of MSI is installed in

[wildcard]

your computer, it installs files

[wildcard]

necessary to continue the

[wildcard]

installation.

[wildcard]

- (5) Refer to steps displayed on the

[wildcard]

off.

[wildcard]

________________________________________

[wildcard]

- OEM Installation:

[wildcard]

from the installation CD to a network

[wildcard]

- Copy the VirusScan installation files

[wildcard]

- Delete the installation files.

[wildcard]

- When installing the VirusScan MSI, use

[wildcard]

the following command:

[wildcard]

msiexec /i d:\vsc\vsc.msi /qn FASTOEM=1

[wildcard]

VirusScanMSI location>

[wildcard]

MEDIAPACKAGEPATH=\vsc\

[wildcard]

The EICAR Standard AntiVirus Test File is a

[wildcard]

combined effort by anti-virus vendors

[wildcard]

1. To test your installation, copy the

[wildcard]

allow it to scan the directory that

[wildcard]

X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

[wildcard]

3. Next, start your anti-virus software and

[wildcard]

the EICAR test file.

[wildcard]

Note: This file is NOT A VIRUS. Delete the file

[wildcard]

when you have finished testing our installation

[wildcard]

scans this file, it will report finding

[wildcard]

to avoid alarming unsuspecting users.

[wildcard]

If HAWK’s pattern matching capability

[wildcard]

will be presented with multiple and

[wildcard]

which Eudora transmits outgoing e-mail

[wildcard]

or older), the Setup program does not retain

[wildcard]

the settings from your previous version’s

[wildcard]

customize your VirusScan settings to suit

[wildcard]

- The Firewall Network Traffic monitor

[wildcard]

displayed on the VirusScan Home page does

[wildcard]

you install McAfee VirusScan with an older

[wildcard]

- McAfee VirusScan is not currently compatible

[wildcard]

properly.

[wildcard]

with Autodesk software. For additional

[wildcard]

information, please visit us at

[wildcard]

perform actions that are potentially hostile

[wildcard]

executes a group of commands without user

[wildcard]

GetDefaultFolder Method.

[wildcard]

ActiveSync\WCESMgr.exe

[wildcard]

Do you want to allow this script to run?

[wildcard]

- If you install McAfee VirusScan 7.0 and then

[wildcard]

Workaround:

[wildcard]

install an older version of any McAfee

[wildcard]

products affected are as follows:

[wildcard]

product, uninstalling McAfee VirusScan 7.0

[wildcard]

- McAfee Firewall 3.x and older

[wildcard]

- McAfee QuickClean 2.x and older

[wildcard]

- Internet Guard Dog 3.0 and older

[wildcard]

To remedy this problem:

[wildcard]

- McAfee Uninstaller 6.5 and older

[wildcard]

- VirusScan 3.X must be manually

[wildcard]

- Installation / uninstallation issues:

[wildcard]

uninstalled before installing this

[wildcard]

Upgrading your computer's operating system

[wildcard]

Migration:

[wildcard]

from any version of Windows to Windows XP

[wildcard]

migration to become disabled after migration

[wildcard]

to Windows XP. You will be made aware of

[wildcard]

causes all McAfee products installed before

[wildcard]

uninstall all McAfee products and reinstall

[wildcard]

product. Therefore, you will need to

[wildcard]

you will be instructed to reinstall the

[wildcard]

using your installation CD or the software

[wildcard]

using your installation CD or the softwares

[wildcard]

note, you can uninstall this product before

[wildcard]

to repair your installation; or to change

[wildcard]

operating system is Windows 2000

[wildcard]

administrative rights if your computer’s

[wildcard]

Windows XP-based computer, you may receive

[wildcard]

- Windows XP installation issues:

[wildcard]

users\.

[wildcard]

an error message similar to the following:

[wildcard]

location <Common Administrative Tools>.All

[wildcard]

incorrect setting in the following registry

[wildcard]

Shell Folders\Common Administrative Tools

[wildcard]

entry:

[wildcard]

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\User

[wildcard]

back up any valued data on your computer.

[wildcard]

Caution: Incorrectly editing the registry

[wildcard]

understand how to restore it if a problem

[wildcard]

this, view the

[wildcard]

Registry Key

[wildcard]

topic in Regedit.exe or the

[wildcard]

following registry key:

[wildcard]

OK.

[wildcard]

(1) Click Start, and click Run.

[wildcard]

Shell Folders

[wildcard]

window, double-click Common Administrative

[wildcard]

(5) In the Value data box of the Edit String

[wildcard]

%ALLUSERSPROFILE%\Start

[wildcard]

line, and then click OK:

[wildcard]

Menu\Programs\Administrative Tools

[wildcard]

(6) On the File menu, click Exit to quit

[wildcard]

compressed archive (e.g., .zip file) the

[wildcard]

VirusScan scan engine traverses and scans

[wildcard]

archive. However, the VirusScan Summary

[wildcard]

scanned as one file scanned.

[wildcard]

remove the installation CD from your

[wildcard]

To successfully complete setup, you must

[wildcard]

computer's CD-ROM drive as you are prompted

[wildcard]

to restart your computer. If the CD is not

[wildcard]

prompted to either boot the Emergency

[wildcard]

Startup Disk, or to remove the CD from your

[wildcard]

unrecognizable font, then there may be too

[wildcard]

Ctrl+Alt+Delete to start your computer

[wildcard]

on-screen installation menu after you insert

[wildcard]

the McAfee installation CD into your

[wildcard]

To install this product, from your Windows

[wildcard]

Browse. Locate the following program file:

[wildcard]

drive letter of your computer’s CD-ROM

[wildcard]

VirusScan. Refer to the steps displayed on

[wildcard]

the Installation Wizard to complete your

[wildcard]

a Windows 2000 o/s and Adaptec DirectCD 4.0

[wildcard]

restart your computer. To prevent this

[wildcard]

before installing McAfee VirusScan.

[wildcard]

A. Install Adaptec DirectCD 5.01 or later

[wildcard]

problem.

[wildcard]

- Access the Windows control panel and

[wildcard]

double-click the VirusScan icon.

[wildcard]

- Select the Services tab and clear the

[wildcard]

- Install Adaptec DirectCD 5.01 or

[wildcard]

5.01, access the Windows control panel

[wildcard]

Select the Services tab and check the

[wildcard]

extracts the files from the archive.

[wildcard]

computer's operating system to Windows 2000

[wildcard]

device. The latest version of this softwares

[wildcard]

described under

[wildcard]

Setup and install your McAfee product. The

[wildcard]

computer's Operating System and its

[wildcard]

computer. Re-start Setup. Perform these

[wildcard]

steps as necessary until you do not receive

[wildcard]

- Safe & Sound is only available for Windows

[wildcard]

help or your Product Guide.

[wildcard]

about Safe & Sound please refer to on-line

[wildcard]

- Disk defragmentation programs move files to

[wildcard]

during a disk defragmentation operation,

[wildcard]

application, or another application active

[wildcard]

that it cannot find the active application

[wildcard]

This is normal and does not mean that the

[wildcard]

like this, close all open applications and

[wildcard]

Internet before you disable VirusScan.

[wildcard]

NOTE: Please be sure to disconnect from the

[wildcard]

- VirusScan 7.0 will not correctly interpret

[wildcard]

disk defragmentation operation again.

[wildcard]

disable the VShield scanner, then run your

[wildcard]

the settings saved in older .VSC files.

[wildcard]

the settings saved in older .VSC files.

[wildcard]

VirusScan 4.0.3 or older .VSC files are not

[wildcard]

- The System Restore functionality in Windows

[wildcard]

recognized by version 7.0.

[wildcard]

recognized by version 7.0.

[wildcard]

Millennium Edition preserves all deleted

[wildcard]

Millennium Edition preserves all deleted

[wildcard]

Millennium Edition preserves all deleted

[wildcard]

Millennium Edition preserves all deleted

[wildcard]

Millennium Edition preserves all deleted

[wildcard]

recognized by version 7.0.

[wildcard]

files. As a result, if you select

[wildcard]

but moved to the _Restore folder, from which

[wildcard]

as the scanner’s response to detecting an

[wildcard]

infection, the file is not actually deleted,

[wildcard]

the VirusScan software cannot delete it.

[wildcard]

Microsoft refers to this condition in an

[wildcard]

- When multiple users are used in a Windows

[wildcard]

http://support.microsoft.com/support/kb/articles/Q263/4/55.ASP.

[wildcard]

2000 or Windows XP [Home or Professional]

[wildcard]

article located at the following URL:

[wildcard]

system, the user has the ability to secure

[wildcard]

These secured folders cannot be scanned by

[wildcard]

authorized by the owner, with VSC. To scan

[wildcard]

folders located on an NTFS-formatted drive.

[wildcard]

any user other than its owner, or those

[wildcard]

these folders, the owner or authorized user

[wildcard]

of the folder, must log on and execute the

[wildcard]

- Instant Updater is unable to determine the

[wildcard]

- Instant Updater is unable to determine the

[wildcard]

scan.

[wildcard]

actions performed by the user after

[wildcard]

scan.

[wildcard]

actions performed by the user after

[wildcard]

downloading a product upgrade. Product

[wildcard]

(virus definition files). The upgrade

[wildcard]

process runs using a program that applies an

[wildcard]

upgrades consist of patches and bug fixes,

[wildcard]

etc; and do not include incremental DAT's

[wildcard]

upgrades consist of patches and bug fixes,

[wildcard]

maintains an Internet connection. If

[wildcard]

- Instant Updater not properly installed.

[wildcard]

If the following error message displays:

[wildcard]

try again.

[wildcard]

you are not connected, reconnect and

[wildcard]

try again.

[wildcard]

you are not connected, reconnect and

[wildcard]

If the following error message displays:

[wildcard]

you are not connected, reconnect and

[wildcard]

try again.

[wildcard]

Error -103 (Instant Updater is not properly

[wildcard]

Pack 2 Release update at the following

[wildcard]

Pack 2 Release update at the following

[wildcard]

You can find the MSXML Parser 3.0 Service

[wildcard]

installed), please dL parser.

[wildcard]

location (you can copy and paste this URL

[wildcard]

location (you can copy and paste this URL

[wildcard]

You can find the MSXML Parser 3.0 Service

[wildcard]

You can find the MSXML Parser 3.0 Service

[wildcard]

rame=true

[wildcard]

into the address bar of your Internet

[wildcard]

browser):

[wildcard]

If you continue to receive -103 errors after

[wildcard]

If you continue to receive -103 errors after

[wildcard]

http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/MSDN-FILES/027/001/772/msdncompositedoc.xml&f

[wildcard]

http://msdn.microsoft.com/downloads/default.asp?url=/downloads/sample.asp?url=/MSDN-FILES/027/001/772/msdncompositedoc.xml&f

[wildcard]

applying this Microsoft patch, the update

[wildcard]

(1) From the Windows task bar, select Start

[wildcard]

Therefore, please try the following:

[wildcard]

> Run (The Run dialog displays).

[wildcard]

> Run (The Run dialog displays).

[wildcard]

Therefore, please try the following:

[wildcard]

may not have registered a file correctly.

[wildcard]

> Run (The Run dialog displays).

[wildcard]

may not have registered a file correctly.

[wildcard]

may not have registered a file correctly.

[wildcard]

> Run (The Run dialog displays).

[wildcard]

(2) In the Run dialog type the following:

[wildcard]

to the default Windows\system directory.

[wildcard]

NOTE: %SystemRoot% is a variable that refers

[wildcard]

regsvr32

[wildcard]

Windows 98/ME - Substitute c:\windows\system

[wildcard]

NOTE: %SystemRoot% is a variable that refers

[wildcard]

Windows 98/ME - Substitute c:\windows\system

[wildcard]

regsvr32

[wildcard]

for '%SystemRoot%/System32'

[wildcard]

(3) Click OK.

[wildcard]

DllRegisterServer succeeded. If you continue

[wildcard]

You should receive a message that the

[wildcard]

DllRegisterServer succeeded. If you continue

[wildcard]

to receive -103 errors, please contact

[wildcard]

to receive -103 errors, please contact

[wildcard]

to receive -103 errors, please contact

[wildcard]

technical support.

[wildcard]

Updater may prompt you to restart your

[wildcard]

computer. If you click

[wildcard]

After you update this product, Instant

[wildcard]

After you update this product, Instant

[wildcard]

- AOL stops responding after updating.

[wildcard]

- AOL stops responding after updating.

[wildcard]

updates.

[wildcard]

questions about McAfee products are also

[wildcard]

Regularly updated lists of frequently asked

[wildcard]

available on the Networks Associates web site,

[wildcard]

Regularly updated lists of frequently asked

[wildcard]

FQ1 - FREQUENTLY ASKED QUESTIONS

[wildcard]

on CompuServe, and on America Online.

[wildcard]

anti-virus software. How do I disable the

[wildcard]

VShield scanner without uninstalling it?

[wildcard]

and the manual recommends disabling any

[wildcard]

Q: I am installing new software on my computer,

[wildcard]

and the manual recommends disabling any

[wildcard]

VShield scanner without uninstalling it?

[wildcard]

A: If you are running the VirusScan software on

[wildcard]

rights, then follow the steps outlined below in

[wildcard]

order to disable the VShield scanner. If you

[wildcard]

first log into your system with administrative

[wildcard]

a Windows 2000 or Windows XP system, you must

[wildcard]

a Windows 2000 or Windows XP system, you must

[wildcard]

are running the software on a Windows 98 or

[wildcard]

- Right-click the VShield icon located

[wildcard]

in your system tray next to the system

[wildcard]

immediately:

[wildcard]

in your system tray next to the system

[wildcard]

- Right-click the VShield icon located

[wildcard]

Windows Me system, you can follow these steps

[wildcard]

Windows Me system, you can follow these steps

[wildcard]

clock, then choose

[wildcard]

Yes.

[wildcard]

disable background scanning. Click

[wildcard]

from the shortcut menu. VShield asks

[wildcard]

you if you are sure you want to

[wildcard]

you if you are sure you want to

[wildcard]

you if you are sure you want to

[wildcard]

Central shortcut on your desktop, or

[wildcard]

- After you install your new software,

[wildcard]

from the Windows Start menu select

[wildcard]

you can reactivate the VShield scanner

[wildcard]

- After you install your new software,

[wildcard]

by double-clicking the VirusScan

[wildcard]

by double-clicking the VirusScan

[wildcard]

you can reactivate the VShield scanner

[wildcard]

load VShield, click Yes. Lastly, you

[wildcard]

can right-click the VShield icon

[wildcard]

Start > Programs > McAfee > McAfee

[wildcard]

can right-click the VShield icon

[wildcard]

Start > Programs > McAfee > McAfee

[wildcard]

VirusScan. When you are prompted to

[wildcard]

located in the system tray and select

[wildcard]

located in the system tray and select

[wildcard]

A: The heuristic scanning feature looks for

[wildcard]

Q: I've activated the VirusScan software's

[wildcard]

heuristic scanning option, and now it

[wildcard]

identifies some viruses as

[wildcard]

heuristic scanning option, and now it

[wildcard]

these characteristics, the program concludes

[wildcard]

that the file is infected. This powerful

[wildcard]

technique allows the program to discover

[wildcard]

scans. When it finds a sufficient number of

[wildcard]

scans. When it finds a sufficient number of

[wildcard]

technique allows the program to discover

[wildcard]

scans. When it finds a sufficient number of